Profile state
Exact-model evidence linked
At least one exact component record is linked below.
Manufacturer profile
MYACTUATOR
Integrated planetary, harmonic and direct-drive actuators with CAN, RS-485 and EtherCAT variants.
Identity boundary
Profile, not endorsement.
RCI links the manufacturer identity to public evidence. Inclusion does not imply independent verification of performance, commercial availability in every region, or any commercial relationship with RCI.
Official website ↗What the current RCI record set actually supports.
28 claim-level observations point to 4 distinct source URLs; unresolved conditions remain visible.
Product focus
Motion & Actuation
Scope is descriptive and does not establish regional availability, fitness or equivalence across product families.
Evidence surface
2 models · 28 claims
4 distinct claim sources and 9 explicit unknown, conflict or limitation entries.
Editorial next step
Deepen the weakest conditions
Prioritize thermal, lifecycle, compatibility and independent-test gaps.
Questions RCI applies before comparison.
These checks define the evidence work still required; they are not claims about this manufacturer.
A
Motion & Actuation
- Separate continuous, peak and stall output
- Preserve duty cycle, thermal and cooling conditions
- Resolve gearing, backlash, encoder and brake boundaries
- Pin voltage, firmware and communication variant
Components in the current release.
Every value on these records points to a claim-level source and verification date.
Integrated planetary actuatoractive
RMD-X8-P9-32-R
A current MYACTUATOR V4 module whose page publishes rated, peak, speed, mass, back-drive, backlash and control-accuracy values through an embedded technical-parameter image.
Integrated planetary actuatoractive
RMD-X8-P9-25-C-N
This record freezes the CAN-bus, no-brake product code RMD-X8-P9-25-C-N. The official details page states the previous name of this actuator was RMD-X8 Pro 1:9 and today lists it under the V2 single-encoder generation, not V3; the RS-485 code RMD-X8-P9-25-R-N shares the same parameter table. Unusually for this vendor, the parameter image defines the rated-torque test method as a thermal-balance long-term working point.