Public BOM audited. This is a source-bound system evidence record, not an independent rebuild.
Desktop arm · Seeed Studio reBot DevArm project
reBot DevArm B601 DM — power-supply assembly
Nested Markdown tables · commit-addressable.
No complete rebuild evidence package found.
The robot name is not the version boundary.
RCI preserves the exact source surface and revision conditions instead of applying one prototype or current product page to every unit.
Platform boundary
reBot DevArm B601 DM — power-supply assembly
Power-supply Consumables BOM and Printed Parts BOM inside hardware/reBot_B601_DM/readme.md at commit a0c709638a341d6b12b005f22f5592c4b1579f56; the broader arm mechanics remain a linked but separate surface.
Version state
Addressable source snapshot
The selected Markdown is commit-addressable but not tied to a numbered arm release, exact shipped configuration or power-supply serial.
Lifecycle boundary
Changes remain attached to the source.
The source says the arm ships without a power supply by default and presents a user-procured Mean Well-based solution; RCI does not treat that optional assembly as factory-included hardware.
Responsibility party
Seeed Studio reBot DevArm project
RCI maps the named public responsibility party; inclusion does not imply endorsement, partnership or unit-level verification.
No structured lifecycle relation selected yet.
Replacement, upgrade, EOL and regional procurement signals remain separate from current availability and as-built identity.
No positive lifecycle claim.
Absence here means the selected source set does not yet support one, not that the platform has no revisions or supply risk.
Strongest supported conclusion
A quantified regional power-supply list, named Mean Well model, connector and wiring specifications, three linked STEP enclosure files, print parameters and illustrated assembly sequence.
Largest rebuild gap: The subsystem is not the whole robot, user crimping remains required, electrical protection verification is absent, and no physical RCI safety or load test exists.
Editorial boundary: This record is deliberately labelled as a power subsystem. It does not establish electrical code compliance, safe user wiring, arm compatibility across revisions or a complete reBot DevArm build.
Twelve gates separate a parts list from a rebuild package.
Partial means a source contains useful material but does not close the exact revision, quantity, part identity or unit-level boundary.
| Evidence dimension | State | What the state means here |
|---|---|---|
| Exact platform revision | Partial | Useful information exists, but exactness, completeness or version binding remains incomplete. |
| Versioned BOM snapshot | Partial | Useful information exists, but exactness, completeness or version binding remains incomplete. |
| Line-item quantities | Published | The selected responsibility-party surface publishes this dimension inside the recorded boundary. |
| Manufacturer part numbers | Partial | Useful information exists, but exactness, completeness or version binding remains incomplete. |
| Supplier links | Published | The selected responsibility-party surface publishes this dimension inside the recorded boundary. |
| Custom-part production files | Published | The selected responsibility-party surface publishes this dimension inside the recorded boundary. |
| Electrical interconnect definition | Published | The selected responsibility-party surface publishes this dimension inside the recorded boundary. |
| Software / firmware binding | Not applicable | This dimension is not applicable to the selected publication surface. |
| License boundary | Published | The selected responsibility-party surface publishes this dimension inside the recorded boundary. |
| Change, EOL and substitution history | Partial | Useful information exists, but exactness, completeness or version binding remains incomplete. |
| Unit-level as-built manifest | Not published | The selected sources do not publish this evidence dimension. |
| Independent rebuild evidence | Not published | The selected sources do not publish this evidence dimension. |
reBot B601 DM power-supply Consumables BOM plus Printed Parts BOM
The count below preserves the responsibility party's publication structure; it is not silently flattened into unique purchasable components.
Selected count
13 rows / list items
Ten consumable/purchased rows plus three printed enclosure rows. This is a subsystem list, not the entire arm BOM; assembly-step tables are excluded from the item count.
Format
Nested Markdown tables
RCI did not treat the publication format as a normalized database table.
Next evidence gate
Normalize without inventing.
Resolve exact part identity, quantity scope, placement, revision and substitution state while retaining nested assemblies, alternatives and generic groups as explicit boundaries.
As-built state
Not published
A public list does not establish what one serialised unit actually contained.
No manufacturer identity is safely linked from the selected rows.
These are responsibility-party BOM mentions, not partnership, endorsement, verified supply or exact-component equivalence.
Generic or unregistered identities remain unlinked.
RCI will add a relationship only after the source publishes a manufacturer identity that maps unambiguously to the directory.
5 bounded nodes and 4 source-supported interface relations.
RCI publishes a connection only when the selected responsibility-party source explicitly supports the endpoints or architecture. A BOM co-occurrence, component capability or engineering convention is not enough.
power node
Regional AC cord boundary
The selected DM power subsystem publishes one US-standard AC cord while requiring a locally compliant three-pin plug.
Identity boundary: Cord manufacturer, certifications, conductor size, fuse and suitability outside the cited region are not established.
Source rows: rebot-b601-power-power-cord
power node
Switched 3-in-1 IEC inlet and AC wiring
One quick-connect 3-in-1 IEC inlet plus three 10 cm 1.5 mm² red/blue/yellow conductors in the selected subsystem table.
Identity boundary: Exact inlet model, fuse rating, terminal type, conductor colour meaning, crimp quality, earth continuity, insulation and code compliance are not verified.
Source rows: rebot-b601-power-iec-inlet, rebot-b601-power-ac-wire
power node
Mean Well LRS-350-24 conversion stage
One LRS-350-24, responsibility-party-labelled 24 V / 14.6 A, inside the optional DM supply assembly.
Identity boundary: Serial, production revision, input selection, output trim, derating, thermal environment, protection trip behavior and measured output are not bound to one unit.
Source rows: rebot-b601-power-psu
power node
XT60E fixed-female DC output assembly
One XT60E fixed female plus 10 cm lug pigtail forms the enclosure DC output.
Identity boundary: Connector brand, polarity inspection, crimp/solder process, wire gauge, current acceptance and strain relief are not verified.
Source rows: rebot-b601-power-xt60-output
power node
XT30U-female to XT60-male arm adapter boundary
One adapter connects the supply-side XT60 output surface toward the arm-side XT30 input boundary.
Identity boundary: Polarity, connector gender at every mating surface, wire gauge, current rating, physical routing and arm revision compatibility are not verified.
Source rows: rebot-b601-power-xt30-xt60
| From → to | Relation | Published support | Still unresolved |
|---|---|---|---|
| Regional AC cord boundary → Switched 3-in-1 IEC inlet and AC wiringsource-to-target | powerRegional three-conductor AC cord into switched IEC inlet | The selected consumables table and assembly sequence place the AC cord at the 3-in-1 IEC inlet of the optional enclosure.Seeed-Projects/reBot-DevArm commit a0c709638a341d6b12b005f22f5592c4b1579f56 | Regional plug/fuse requirements, inlet model, conductor assignment, earth continuity, insulation, strain relief and code acceptance are not verified. RCI has not connected this assembly to mains.Physical validation: none. |
| Switched 3-in-1 IEC inlet and AC wiring → Mean Well LRS-350-24 conversion stagesource-to-target | powerSwitched AC inlet through three user-crimped conductors to LRS-350-24 | The official assembly steps direct the builder to wire the IEC inlet and supply according to the published sequence using the listed AC conductors.Seeed-Projects/reBot-DevArm commit a0c709638a341d6b12b005f22f5592c4b1579f56 | Terminal map, input-voltage selection, fuse, lug/crimp process, torque, earth bonding, creepage, insulation and electrical inspection records are not frozen. RCI has not assembled or energized the mains side.Physical validation: none. |
| Mean Well LRS-350-24 conversion stage → XT60E fixed-female DC output assemblysource-to-target | powerNominal 24 V DC output to fixed XT60E female assembly | The subsystem BOM and assembly sequence identify the LRS-350-24 as the conversion stage and install the XT60 output in the front enclosure.Seeed-Projects/reBot-DevArm commit a0c709638a341d6b12b005f22f5592c4b1579f56 | DC polarity, output trim, wire gauge, crimp/solder method, terminal torque, current acceptance, fuse and measured output under load are not published or verified. RCI has not measured this path.Physical validation: none. |
| XT60E fixed-female DC output assembly → XT30U-female to XT60-male arm adapter boundarysource-to-target | powerXT60 enclosure output through XT30U-female-to-XT60-male adapter toward arm input | The fixed consumables table publishes one XT60E output assembly and one XT30U-female-to-XT60-male adapter cable for the optional supply path.Seeed-Projects/reBot-DevArm commit a0c709638a341d6b12b005f22f5592c4b1579f56 | The full mating sequence, polarity, wire gauge, connector current rating, strain relief, arm-side socket revision and load behavior are not physically verified. RCI has not connected the supply to an arm.Physical validation: none. |
13 source items converted into claim-bounded records.
Identity, quantity and installed-hardware boundaries remain separate fields; a generic source label is never promoted to an exact orderable model.
| Source item | Class | Identity | Quantity boundary | Role + unresolved evidence |
|---|---|---|---|---|
| Mean Well LRS-350-24 power supplyConsumables BOM | powerInstalled / build item | variant-namedMean Well · LRS-350-24 · 24 V / 14.6 A | 1 unit1 source-table unit; not an RCI-verified as-built count. | Arm external DC powerNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| US-standard AC power cordConsumables BOM | cableInstalled / build item | generic-descriptionNo exact identity published | 1 unit1 source-table unit; not an RCI-verified as-built count. | Mains input cableRegional plug and compliance boundary is US-specific in the selected row. |
| XT60E fixed female output assemblyConsumables BOM | powerInstalled / build item | variant-namedXT60E female + lug / 10 cm / 4 mm lug hole | 1 unit1 source-table unit; not an RCI-verified as-built count. | DC output portNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| 1.5 mm² AC wiringConsumables BOM | cableInstalled / build item | generic-descriptionred, blue and yellow · 10 cm | 3 unit3 source-table units; not an RCI-verified as-built count. | Internal mains wiringUser crimping is required and pre-crimped leads are not included. |
| 3-in-1 IEC inlet socketConsumables BOM | powerInstalled / build item | generic-descriptionquick-connect red switch / dual nuts | 1 unit1 source-table unit; not an RCI-verified as-built count. | Switched fused mains inletNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| XT30-to-XT60 adapter cableConsumables BOM | cableInstalled / build item | generic-descriptionXT30U female to XT60 male | 1 unit1 source-table unit; not an RCI-verified as-built count. | Power adapter harnessNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| M4×6 stainless countersunk Phillips screwConsumables BOM | fastenerInstalled / build item | variant-namedM4×6 | 6 unit6 source-table units; not an RCI-verified as-built count. | Power-enclosure fasteningNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| M3×8 stainless countersunk Phillips screwConsumables BOM | fastenerInstalled / build item | variant-namedM3×8 | 2 unit2 source-table units; not an RCI-verified as-built count. | Output-port fasteningNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| M3×8 stainless pan-head Phillips screwConsumables BOM | fastenerInstalled / build item | variant-namedM3×8 | 2 unit2 source-table units; not an RCI-verified as-built count. | IEC-inlet fasteningNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| M3×2.5 hex nutConsumables BOM | fastenerInstalled / build item | variant-namedM3×2.5 | 2 unit2 source-table units; not an RCI-verified as-built count. | Power-enclosure fasteningNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| Front CoverPrinted Parts BOM | custom-mechanicalInstalled / build item | file-identifiedDM-power-Top Cover.stp · PLA · 0.4 mm nozzle · 0.2 mm layer · 30% infill | 1 unit1 source-table unit; not an RCI-verified as-built count. | Power-supply front enclosureNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| Rear CoverPrinted Parts BOM | custom-mechanicalInstalled / build item | file-identifiedDM-power-Bottom Cover.stp · PLA · 0.4 mm nozzle · 0.2 mm layer · 30% infill | 1 unit1 source-table unit; not an RCI-verified as-built count. | Power-supply rear enclosureNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
| Front Cover SliderPrinted Parts BOM | custom-mechanicalInstalled / build item | file-identifiedDM-power-Top Cover-Sliding Cover.stp · PLA · 0.4 mm nozzle · 0.2 mm layer · 30% infill | 1 unit1 source-table unit; not an RCI-verified as-built count. | Power-supply service coverNo serialised as-built manifest or independent physical rebuild confirms this item in one unit. |
Every conclusion returns to a selected source.
Links point to the responsibility party's material. RCI does not republish third-party BOM rows, CAD or retailer content through this profile.
reBot DevArm B601 DM hardware specification ↗
Power-supply BOMs, printable enclosure files and assembly sequence
Commit a0c7096reBot DevArm repository ↗
Hardware specification, production files and repository license
Commit a0c7096 · CERN-OHL-W-2.0Correction path
Know a newer revision or an exact as-built record?
Corrections must identify the platform revision, source location and the exact field affected. Manufacturer or project-party clarification is displayed alongside independently sourced evidence without replacing the original boundary.
Send a documented correction →