Public BOM audited. This is a source-bound system evidence record, not an independent rebuild.
Humanoid · loongOpen / Humanoid Robots (Shanghai)
QingLoong V2.5 English engineering release
Versioned repository file tree · commit-addressable.
No complete rebuild evidence package found.
The robot name is not the version boundary.
RCI preserves the exact source surface and revision conditions instead of applying one prototype or current product page to every unit.
Platform boundary
QingLoong V2.5 English engineering release
English-language QingLoong V2.5 tree at OpenLoong-Hardware commit 3aeb3759661602092b74c33c271d3052e1a94280.
Version state
Addressable source snapshot
The selected engineering surface is immutable at the cited commit or release asset. It is not a serial-numbered as-built robot manifest.
Lifecycle boundary
Changes remain attached to the source.
The repository also contains Chinese-language counterparts and older/unscoped material. This profile selects English V2.5 only and does not count translated duplicates.
Responsibility party
loongOpen / Humanoid Robots (Shanghai)
RCI maps the named public responsibility party; inclusion does not imply endorsement, partnership or unit-level verification.
No structured lifecycle relation selected yet.
Replacement, upgrade, EOL and regional procurement signals remain separate from current availability and as-built identity.
No positive lifecycle claim.
Absence here means the selected source set does not yet support one, not that the platform has no revisions or supply risk.
Strongest supported conclusion
Commit-addressable full-size humanoid part drawings, assemblies and electrical documentation with responsibility-party path identities.
Largest rebuild gap: No flattened procurement BOM, unit quantities, supplier identities, tolerances acceptance record or independently assembled QingLoong unit is established.
Editorial boundary: RCI normalizes only responsibility-party file identity, revision, engineering role and unresolved boundaries. The record is not a procurement BOM, unit manifest, successful rebuild, compatibility proof, endorsement or RCI hardware test.
Twelve gates separate a parts list from a rebuild package.
Partial means a source contains useful material but does not close the exact revision, quantity, part identity or unit-level boundary.
| Evidence dimension | State | What the state means here |
|---|---|---|
| Exact platform revision | Published | The selected responsibility-party surface publishes this dimension inside the recorded boundary. |
| Versioned BOM snapshot | Partial | Useful information exists, but exactness, completeness or version binding remains incomplete. |
| Line-item quantities | Not published | The selected sources do not publish this evidence dimension. |
| Manufacturer part numbers | Partial | Useful information exists, but exactness, completeness or version binding remains incomplete. |
| Supplier links | Not published | The selected sources do not publish this evidence dimension. |
| Custom-part production files | Published | The selected responsibility-party surface publishes this dimension inside the recorded boundary. |
| Electrical interconnect definition | Partial | Useful information exists, but exactness, completeness or version binding remains incomplete. |
| Software / firmware binding | Partial | Useful information exists, but exactness, completeness or version binding remains incomplete. |
| License boundary | Published | The selected responsibility-party surface publishes this dimension inside the recorded boundary. |
| Change, EOL and substitution history | Partial | Useful information exists, but exactness, completeness or version binding remains incomplete. |
| Unit-level as-built manifest | Not published | The selected sources do not publish this evidence dimension. |
| Independent rebuild evidence | Not published | The selected sources do not publish this evidence dimension. |
QingLoong V2.5 English 2D drawings, 3D files, electrical drawings and open-source introduction
The count below preserves the responsibility party's publication structure; it is not silently flattened into unique purchasable components.
Selected count
178 rows / list items
178 distinct responsibility-party file paths in the selected immutable source boundary. A file path is an engineering evidence record, not an installed quantity or a unique procured component.
Format
Versioned repository file tree
RCI did not treat the publication format as a normalized database table.
Next evidence gate
Normalize without inventing.
Resolve exact part identity, quantity scope, placement, revision and substitution state while retaining nested assemblies, alternatives and generic groups as explicit boundaries.
As-built state
Not published
A public list does not establish what one serialised unit actually contained.
No manufacturer identity is safely linked from the selected rows.
These are responsibility-party BOM mentions, not partnership, endorsement, verified supply or exact-component equivalence.
Generic or unregistered identities remain unlinked.
RCI will add a relationship only after the source publishes a manufacturer identity that maps unambiguously to the directory.
No interface edge clears the current publication gate.
RCI publishes a connection only when the selected responsibility-party source explicitly supports the endpoints or architecture. A BOM co-occurrence, component capability or engineering convention is not enough.
Parts are known; connections are not asserted.
The selected source may list boards, cables, sensors or power items, but RCI has not found a sufficiently explicit endpoint-to-endpoint statement for this revision. This is an evidence gap, not proof that no connection exists.
178 source items converted into claim-bounded records.
Identity, quantity and installed-hardware boundaries remain separate fields; a generic source label is never promoted to an exact orderable model.
| Source item | Class | Identity | Quantity boundary | Role + unresolved evidence |
|---|---|---|---|---|
| TA00-03-0001-Waist Bracket.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing/TA00-03-0001-Waist Bracket.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0002-Front Blind Spot Camera Bracket.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing/TA00-03-0002-Front Blind Spot Camera Bracket.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0003-Side Swing Motor Bracket.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing/TA00-03-0003-Side Swing Motor Bracket.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0004-Front Swing Motor Bracket.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing/TA00-03-0004-Front Swing Motor Bracket.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0005-Waist Support Shaft.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing/TA00-03-0005-Waist Support Shaft.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0006-Positioning Pin.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing/TA00-03-0006-Positioning Pin.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0007-Positioning Pin Handle.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing/TA00-03-0007-Positioning Pin Handle.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0008-Rear Blind Spot Camera Bracket.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing/TA00-03-0008-Rear Blind Spot Camera Bracket.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0009-Turnover Fixing Plate.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-03-00-Waist Component - 2D Drawing/TA00-03-0009-Turnover Fixing Plate.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0001 Front Chest Frame - Drawing 1.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0001 Front Chest Frame - Drawing 1.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0002 Hook (Right) - Drawing 1.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0002 Hook (Right) - Drawing 1.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0003 Hook (Left) - Drawing 1.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0003 Hook (Left) - Drawing 1.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0004 Radar Adapter Plate - Drawing 1.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0004 Radar Adapter Plate - Drawing 1.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0005 WiFi Heat Dissipation Plate - Drawing 1.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0005 WiFi Heat Dissipation Plate - Drawing 1.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0006 Switch Fixing Part - Drawing 1.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0006 Switch Fixing Part - Drawing 1.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0007 Main Control Fixing Part - Drawing 1.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0007 Main Control Fixing Part - Drawing 1.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0008 Main Control Fixing Part (Sub) - Drawing 1.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0008 Main Control Fixing Part (Sub) - Drawing 1.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0009 Cloud Box Support Plate - Drawing 1.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0009 Cloud Box Support Plate - Drawing 1.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0010 Battery Fixing Plate - Drawing 1.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0010 Battery Fixing Plate - Drawing 1.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0011 Battery Fixing Plate (Sub) - Drawing 1.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0011 Battery Fixing Plate (Sub) - Drawing 1.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0012 Surround Fixing Part (Rear) - Drawing 1.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0012 Surround Fixing Part (Rear) - Drawing 1.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0013 Surround Fixing Part (Rear Mirror) - Drawing 1.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0013 Surround Fixing Part (Rear Mirror) - Drawing 1.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0014 Surround Fixing Part (Front) - Drawing 1.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0014 Surround Fixing Part (Front) - Drawing 1.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0015 Surround Fixing Part (Front Mirror) - Drawing 1.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0015 Surround Fixing Part (Front Mirror) - Drawing 1.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-0016 Rear Bracket - Drawing 1.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-04-0016 Rear Bracket - Drawing 1.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-0001 Cylindrical Base - Drawing 1.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-04-00-Chest System - 2D Drawing/TA00-07-0001 Cylindrical Base - Drawing 1.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0003.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0003.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0004.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0004.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0005.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0005.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0006.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0006.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0007.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0007.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0008.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0008.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0009.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0009.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0010.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0010.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0011.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0011.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0012.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0012.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0013.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0013.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0014.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0014.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0015.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-07-00-Head Perception System - 2D Drawing/TA00-07-01-0015.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0001 Knee Joint Pin.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0001 Knee Joint Pin.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0002 膝关节销轴锁紧螺钉.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0002 膝关节销轴锁紧螺钉.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0003 - A1 Link Pin C.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0003 - A1 Link Pin C.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0004 Link Bushing B.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0004 Link Bushing B.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0006 Ankle Pitch Axis.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0006 Ankle Pitch Axis.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0007 Ankle Pitch Axis B.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0007 Ankle Pitch Axis B.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0011 Ankle Pitch Axis Washer.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0011 Ankle Pitch Axis Washer.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0012 Ankle Pitch Axis Locking Screw.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0012 Ankle Pitch Axis Locking Screw.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0013 Cross Pitch Axis.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0013 Cross Pitch Axis.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0014 Cross Side Swing Axis.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0014 Cross Side Swing Axis.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0015 Cross Side Swing Axis Bushing.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0015 Cross Side Swing Axis Bushing.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0016 Foot Joint Locking Screw.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0016 Foot Joint Locking Screw.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0017 Cross Pitch Axis.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0017 Cross Pitch Axis.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0018 Knee Joint Bearing Washer.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-00-0018 Knee Joint Bearing Washer.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-01-0001-A1 Hip Joint Turnover Motor Connector.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-01-0001-A1 Hip Joint Turnover Motor Connector.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-01-0002-A1 Hip Joint Turnover Motor Connector B.PDFQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-01-0002-A1 Hip Joint Turnover Motor Connector B.PDF | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-01-0003-A1 Turnover Motor Bearing Stopper.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-01-0003-A1 Turnover Motor Bearing Stopper.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-01-0004 Front Swing Alignment Part.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-01-0004 Front Swing Alignment Part.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0001-A1 Hip Joint Pitch Motor Flange.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0001-A1 Hip Joint Pitch Motor Flange.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0002 -A1 Pitch Motor Support Frame.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0002 -A1 Pitch Motor Support Frame.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0003 -A1 Right Thigh Bracket.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0003 -A1 Right Thigh Bracket.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0004 Knee Joint Motor Joint Shaft.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0004 Knee Joint Motor Joint Shaft.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0005 Bearing Locking Screw.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0005 Bearing Locking Screw.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0006 -A1 Bearing Steel Sleeve.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0006 -A1 Bearing Steel Sleeve.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0007-A1 Rocking Arm.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0007-A1 Rocking Arm.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0008 Link Pin.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0008 Link Pin.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0009 Link Locking Screw B.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0009 Link Locking Screw B.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0010 Link.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0010 Link.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0011 Link Bushing.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0011 Link Bushing.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0012 Support Shaft B.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0012 Support Shaft B.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0015 Hip Joint Pitch Limit Flange.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-02-0015 Hip Joint Pitch Limit Flange.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0001-A1 Right Lower Leg Bracket.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-04-0001-A1 Right Lower Leg Bracket.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0002-A1 Lower Leg Curve.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-04-0002-A1 Lower Leg Curve.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0003 Lower Leg Pull Rod A.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-04-0003 Lower Leg Pull Rod A.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0004 Lower Leg Pull Rod C.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-04-0004 Lower Leg Pull Rod C.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0005-A1 Right Lower Leg Lower Limit.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-04-0005-A1 Right Lower Leg Lower Limit.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0006-A1 Right Lower Leg Upper Limit.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-04-0006-A1 Right Lower Leg Upper Limit.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-06 Foot Assembly.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-06 Foot Assembly.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Assembly-level engineering definitionFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-06-0001 Foot Body.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-06-0001 Foot Body.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-06-0002 Foot Bottom Rear Rubber Pad.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-06-0002 Foot Bottom Rear Rubber Pad.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-06-0003 Foot Bottom Front Rubber Pad.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-06-0003 Foot Bottom Front Rubber Pad.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-06-0004 Foot Bottom End Cap.pdfQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 2D Drawing/TA00-12-00-Leg and Foot System - 2D Drawing/TA00-12-06-0004 Foot Bottom End Cap.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Production drawing or supporting engineering documentFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0001-Waist Bracket1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0001-Waist Bracket1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0002-Front Blind-Spot Camera Bracket1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0002-Front Blind-Spot Camera Bracket1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0003-Front Camera Adapter Block1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0003-Front Camera Adapter Block1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0004-Waist Rotation Bearing Retaining Ring1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0004-Waist Rotation Bearing Retaining Ring1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0005-Waist Rotation Motor Shaft1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0005-Waist Rotation Motor Shaft1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0006-Side Swing Motor Bracket1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0006-Side Swing Motor Bracket1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0007-Front Swing Motor Bracket1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0007-Front Swing Motor Bracket1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0008-Waist Side Swing Support Rotating Shaft1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0008-Waist Side Swing Support Rotating Shaft1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0009-Waist Side Swing Bearing Retaining Ring1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0009-Waist Side Swing Bearing Retaining Ring1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0010-Waist Side Swing Bearing Locking Screw1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0010-Waist Side Swing Bearing Locking Screw1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0011-Waist Pitch Bearing Retaining Ring1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0011-Waist Pitch Bearing Retaining Ring1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0012-Waist Pitch Support Rotating Shaft1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0012-Waist Pitch Support Rotating Shaft1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0013-Waist Rotation Fixing Bracket1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0013-Waist Rotation Fixing Bracket1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03-0014-Waist Rotation Fixing Bracket Mirrored1.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-03-0014-Waist Rotation Fixing Bracket Mirrored1.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-01-01-0002-Waist Adapter Plate 105311.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-03-00-Waist Component - 3D File/TA00-04-01-01-0002-Waist Adapter Plate 105311.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-01-0001 Arm Lifting Mount.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-01-0001 Arm Lifting Mount.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-01-0003 Rear Support Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-01-0003 Rear Support Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-01-0004 Rear Support Plate (Mirrored).stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-01-0004 Rear Support Plate (Mirrored).step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-01-0005 Front Support Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-01-0005 Front Support Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-01-0006 Front Support Plate (Mirrored).stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-01-0006 Front Support Plate (Mirrored).step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-01-0007 Upper Support Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-01-0007 Upper Support Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-01-01-0002 Waist Adapter Plate 1105310604.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-01-01-0002 Waist Adapter Plate 1105310604.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-02-0001 Top Fixing Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-02-0001 Top Fixing Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-02-0002 Side Fixing Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-02-0002 Side Fixing Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-02-0003 Rear Mounting Side Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-02-0003 Rear Mounting Side Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-02-0004 Rear Mounting Side Plate (Mirrored).stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-02-0004 Rear Mounting Side Plate (Mirrored).step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-02-0005 Dust Shield.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-02-0005 Dust Shield.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-03-0001 Head Mounting Base.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-03-0001 Head Mounting Base.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-03-0002 Mounting Adapter.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-03-0002 Mounting Adapter.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-03-0003 Radio Fixing Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-03-0003 Radio Fixing Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-03-0004 Main Controller Fixing Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-03-0004 Main Controller Fixing Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-03-0005 WIFI Module Heat Sink Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-03-0005 WIFI Module Heat Sink Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-03-0006 Switch Fixing Plate.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-03-0006 Switch Fixing Plate.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-03-0007 LiDAR Fixing Bracket.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-03-0007 LiDAR Fixing Bracket.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-03-0008 Adapter Box Fixing Bracket.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-03-0008 Adapter Box Fixing Bracket.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-04-0001 Front Protection Bracket.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-04-0001 Front Protection Bracket.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-04-0002 Rear Protection Bracket.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-04-00-Chest System - 3D File/TA00-04-04-0002 Rear Protection Bracket.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0002 Perception Head Window V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0002 Perception Head Window V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0004 Front Assembly Plate V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0004 Front Assembly Plate V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Assembly-level engineering definitionFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0005 Rear Assembly Plate V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0005 Rear Assembly Plate V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Assembly-level engineering definitionFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0006 Frame Base Plate V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0006 Frame Base Plate V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0007 Side Support V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0007 Side Support V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0008 Side Support 2 V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0008 Side Support 2 V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0009 Rotation Output Structural Component V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0009 Rotation Output Structural Component V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0010 Side Mounting Bracket V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0010 Side Mounting Bracket V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0011 Frame Top Plate V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0011 Frame Top Plate V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0012 Binocular Camera Bracket V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0012 Binocular Camera Bracket V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0013 Pitch Cantilever Structural Component V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0013 Pitch Cantilever Structural Component V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0014 Pitch Output Structural Component V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0014 Pitch Output Structural Component V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0015 Pitch Cantilever Connecting Component V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0015 Pitch Cantilever Connecting Component V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0016 Camera Mount (Left) V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0016 Camera Mount (Left) V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07-01-0017 Camera Mount (Right) V2.5.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-07-00-Head Perception System - 3D File/TA00-07-01-0017 Camera Mount (Right) V2.5.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| 1. TA00-12-00-0007 Ankle Pitch Axis B.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/1. TA00-12-00-0007 Ankle Pitch Axis B.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| 1. TA00-12-00-0013 Cross Pitch Axis.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/1. TA00-12-00-0013 Cross Pitch Axis.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0001 Knee Joint Pin Shaft.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0001 Knee Joint Pin Shaft.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0002 Knee Joint Pin Locking Screw.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0002 Knee Joint Pin Locking Screw.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0003 Connecting Rod Pin C.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0003 Connecting Rod Pin C.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0004 Connecting Rod Bushing B.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0004 Connecting Rod Bushing B.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0006 Ankle Pitch Axis.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0006 Ankle Pitch Axis.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0011 Ankle Pitch Axis Shim.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0011 Ankle Pitch Axis Shim.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0014 Cross Roll Axis.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0014 Cross Roll Axis.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0015 Cross Roll Axis Bushing.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0015 Cross Roll Axis Bushing.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0016 Ankle Joint Locking Screw.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0016 Ankle Joint Locking Screw.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0017 Cross Pitch Axis Joint Bushing.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0017 Cross Pitch Axis Joint Bushing.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00-0018 Knee Joint Bearing Shim.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-00-0018 Knee Joint Bearing Shim.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0001 Hip Pitch Motor Flange.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0001 Hip Pitch Motor Flange.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0002 Pitch Motor Support Bracket.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0002 Pitch Motor Support Bracket.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0003 Right Thigh Bracket.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0003 Right Thigh Bracket.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0004 Knee Motor Joint Shaft.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0004 Knee Motor Joint Shaft.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0005 Bearing Lock Nut.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0005 Bearing Lock Nut.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0006 Bearing Steel Sleeve.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0006 Bearing Steel Sleeve.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0007 Rocking Arm.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0007 Rocking Arm.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0008 Connecting Rod Pin.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0008 Connecting Rod Pin.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0009 Connecting Rod Locking Screw B.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0009 Connecting Rod Locking Screw B.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0010 Connecting Rod.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0010 Connecting Rod.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0011 Connecting Rod Bushing.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0011 Connecting Rod Bushing.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0012 Support Shaft B.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0012 Support Shaft B.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-02-0015 Hip Pitch Limit Block.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-02-0015 Hip Pitch Limit Block.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0001 Right Calf Bracket.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-04-0001 Right Calf Bracket.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0002-A1 Calf Crank.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-04-0002-A1 Calf Crank.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0003 Calf Tie Rod A.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-04-0003 Calf Tie Rod A.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0004 Calf Tie Rod C.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-04-0004 Calf Tie Rod C.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0005 Right Calf Lower Limit.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-04-0005 Right Calf Lower Limit.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-04-0006 Right Calf Upper Limit.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-04-0006 Right Calf Upper Limit.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-06-0001 Foot Body.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-06-0001 Foot Body.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-06-0002 Sole Rear Rubber Pad.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-06-0002 Sole Rear Rubber Pad.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-06-0003 Sole Front Rubber Pad.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-06-0003 Sole Front Rubber Pad.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-06-0004 Sole End Cap.stepQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-12-00-Leg and Foot System - 3D File/TA00-12-06-0004 Sole End Cap.step | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-03 Waist Bracket Assembly.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File/TA00-03 Waist Bracket Assembly.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Assembly-level engineering definitionFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-00 Thoracic Section (Cased).STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File/TA00-04-00 Thoracic Section (Cased).STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-04-00 Thoracic Section (Uncased).STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File/TA00-04-00 Thoracic Section (Uncased).STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-07 Head Assembly.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File/TA00-07 Head Assembly.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Assembly-level engineering definitionFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00 Leg System (Fully Cased).STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File/TA00-12-00 Leg System (Fully Cased).STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Assembly-level engineering definitionFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-12-00 Leg System (Uncased).STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File/TA00-12-00 Leg System (Uncased).STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Custom-part geometry or production assetFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| TA00-Qinglong Humanoid Robot - Master Assembly.STEPQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File | custom-mechanicalAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - 3D File/TA00-Assemblies of Modules - 3D File/TA00-Qinglong Humanoid Robot - Master Assembly.STEP | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Assembly-level engineering definitionFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| zh-Electrical Drawings.pdfQingLoong V2.5/en/QingLoong V2.5 - Electrical Drawings and Open Source Content Introduction | controlAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - Electrical Drawings and Open Source Content Introduction/zh-Electrical Drawings.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Electrical design or fabrication evidenceFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
| zh-Open Source Content.pdfQingLoong V2.5/en/QingLoong V2.5 - Electrical Drawings and Open Source Content Introduction | controlAlternative / not simultaneously installed | file-identifiedQingLoong V2.5/en/QingLoong V2.5 - Electrical Drawings and Open Source Content Introduction/zh-Open Source Content.pdf | Not publishedOne distinct file path is present in the selected immutable evidence surface; the path does not publish an installed or procurement quantity. | Electrical design or fabrication evidenceFile presence does not prove that this revision was manufactured or installed on one physical robot. No unit-level as-built manifest binds this file to a serialised system. |
Every conclusion returns to a selected source.
Links point to the responsibility party's material. RCI does not republish third-party BOM rows, CAD or retailer content through this profile.
OpenLoong-Hardware — QingLoong V2.5 English release tree ↗
178 English release files across 2D drawings, 3D files and electrical/open-source introduction folders
English-language QingLoong V2.5 tree at OpenLoong-Hardware commit 3aeb3759661602092b74c33c271d3052e1a94280.Correction path
Know a newer revision or an exact as-built record?
Corrections must identify the platform revision, source location and the exact field affected. Manufacturer or project-party clarification is displayed alongside independently sourced evidence without replacing the original boundary.
Send a documented correction →