Sony DepthSense IMX556 time-of-flight sensor with 940 nm VCSEL illumination and GigE Vision transport
Perception & Sensing · Time-of-flight 3D camera
blaze-101
An industrial ToF camera whose official documentation publishes unusually specific accuracy, warm-up, reflectivity and ambient-light conditions.
Reported values, conditions attached.
Evidence state describes the claim—not the prestige of the company or document.
| Claim | Reported value | Condition / boundary | State | Source |
|---|---|---|---|---|
| Measurement rangerange | Short 0.3–1.5; long 0.3–10 m | Separate short- and long-range modes. | M · Manufacturer claimed | Basler blaze-101 Product Documentation ↗General Specifications and Accuracy Test Conditions Checked 2026-08-10 |
| Depth outputresolution_fps | 640 × 480 at 20 fps default / 30 fps FastMode | FastMode changes the operating mode; it is not the default. | M · Manufacturer claimed | Basler blaze-101 Product Documentation ↗General Specifications and Accuracy Test Conditions Checked 2026-08-10 |
| Field of viewfov | 67 × 51 ° | Horizontal × vertical. | M · Manufacturer claimed | Basler blaze-101 Product Documentation ↗General Specifications and Accuracy Test Conditions Checked 2026-08-10 |
| Typical accuracyaccuracy | ±5 mm | 0.5–5.5 m; 20-minute warm-up; flat white 90% target; no ambient light; 22°C; central 40 × 40 pixels; 25-image average. | M · Manufacturer claimed | Basler blaze-101 Product Documentation ↗General Specifications and Accuracy Test Conditions Checked 2026-08-10 |
| Data interfaceinterface | Gigabit Ethernet / GigE Vision | 1000 Mbit/s communication interface. | M · Manufacturer claimed | Basler blaze-101 Product Documentation ↗General Specifications and Accuracy Test Conditions Checked 2026-08-10 |
| Synchronization modessync | PTP IEEE 1588, hardware trigger, software trigger, free run | Multi-camera operation is supported, but achieved timing depends on network and configuration. | M · Manufacturer claimed | Basler blaze-101 Product Documentation ↗General Specifications and Accuracy Test Conditions Checked 2026-08-10 |
| Camera powerpower | <15 mean; <55 peak W | 24 VDC ±10%; typical values are lower in the cited documentation. | M · Manufacturer claimed | Basler blaze-101 Product Documentation ↗General Specifications and Accuracy Test Conditions Checked 2026-08-10 |
Known limits
What this record does not prove.
- The ±5 mm claim is not valid outside its stated target, temperature, warm-up and ambient-light test conditions.
- A 10 m range figure does not imply ±5 mm accuracy at 10 m.